Skip to main content
Version: v2.2.x LTS

Onboard a REST API without code changes required

Onboard a REST API without code changes required

As a user of Zoweâ„¢, onboard an existing REST API service to the Zoweâ„¢ API Mediation Layer without changing the code of the API service. This form of onboarding is also refered to as, "static onboarding".

Note: When developing a new service, it is not recommended to onboard a REST service using this method, as this method is non-native to the API Mediation Layer. For a complete list of methods to onboard a REST service natively to the API Mediation Layer, see the Onboarding Overview.

The following procedure outlines the steps to onboard an API service through the API Gateway in the API Mediation Layer without requiring code changes.

Tip: For more information about the structure of APIs and which APIs to expose in the Zowe API Mediation Layer, see the Onboarding Overview.

Identify the APIs that you want to expose#

The first step in API service onboarding is to identify the APIs that you want to expose.

Follow these steps:

  1. Identify the following parameters of your API service:

    • Hostname
    • Port
    • (Optional) base path where the service is available. This URL is called the base URL of the service.

    Example:

    In the sample service described in the Onboarding Overview, the URL of the service is: http://localhost:8080.

  2. Identify the API of the service that you want to expose through the API Gateway.

    Example:

    The API provided by the sample service is a second version of the Pet Store API. All the endpoints to be onboarded are available through http://localhost:8080/v2/ URL. This REST API is therefore available at the path /v2 relative to base URL of the service. There is no version 1 in this case.

  3. Choose the service ID of your service. The service ID identifies the service uniquely in the API Gateway. The service ID is an alphanumeric string in lowercase ASCII.

    Example:

    In the sample service, the service ID is petstore.

  4. Decide which URL to use to make this API available in the API Gateway. This URL is referred to as the gateway URL and is composed of the API type and the major version. The usually used types are: api, ui and ws but you can use any valid URL element you want.

    Example:

    In the sample service, we provide a REST API. The first segment is /api as the service provides only one REST API. To indicate that this is version 2, the second segment is /v2. This version is required by the Gateway. If your service does not have a version, use v1 on the Gateway.

Define your service and API in YAML format#

After you identify the APIs you want to expose, you need to define your service and API in YAML format as presented in the following sample petstore service example.

Example:

To define your service in YAML format, provide the following definition in a YAML file as in the following sample petstore service. This configuration is the minimal configuration necessary for the Gateway to properly route the requests to the application and to show the Service in the Catalog UI.

Note: For more details about configuration, see Customize configuration parameters.

services:    - serviceId: petstore      catalogUiTileId: static      instanceBaseUrls:        - http://localhost:8080      routes:        - gatewayUrl: api/v2          serviceRelativeUrl: /v2      authentication:              scheme: httpBasicPassTicket              applid: ZOWEAPPL      apiInfo:        - apiId: io.swagger.petstore          gatewayUrl: api/v2
catalogUiTiles:    static:        title: Static API services        description: Services which demonstrate how to make an API service discoverable in the APIML ecosystem using YAML definitions

In this example, a suitable name for the file is petstore.yml.

Notes:

  • The filename does not need to follow specific naming conventions but it requires the .yml extension.

  • The file can contain one or more services defined under the services: node.

  • Each service has a service ID. In this example, the service ID is petstore. The service id is used as a part of the request URL towards the Gateway. It is removed by the Gateway when forwarding the request to the service.

  • The service can have one or more instances. In this case, only one instance http://localhost:8080 is used.

  • One API is provided and the requests with the relative base path api/v2 at the API Gateway (full gateway URL: https://gateway:port/serviceId/api/v2/...) are routed to the relative base path /v2 at the full URL of the service (http://localhost:8080/v2/...).

  • The file on USS should be encoded in ASCII to be read correctly by the API Mediation Layer.

Tips:

  • There are more examples of API definitions at this link.
  • For more details about how to use YAML format, see this link.

Route your API#

Routing is the process of sending requests from the API Gateway to a specific API service. Route your API by using the same format as in the following petstore example. The configuration parameters are explained in Customize configuration parameters. Gateway URL format:

https://{gatewayHost}:{port}/api/v{majorVersion}/{serviceId}/{resource}

Note: The API Gateway differentiates major versions of an API.

Example:

When the configuration parameters are:

services:    serviceId: petstore    instanceBaseUrls:        - https://localhost:8080    routes:        gatewayUrl: api/v2        serviceRelativeUrl: /v2

To access API version 2 of the service petstore, gateway URL will be:

https://gateway-host:port/petstore/api/v2

It will be routed to:

https://localhost:8080/v2

To access resource pets of the petstore version 2 API, gateway URL will be:

https://gateway:port/petstore/api/v2/pets

It will be routed to:

https://localhost:8080/v2/pets

Note: This method enables you to access the service through a stable URL, and move the service to another machine without changing the gateway URL. Accessing a service through the API Gateway also enables you to have multiple instances of the service running on different machines to achieve high-availability.

Customize configuration parameters#

This part contains a more complex example of the configuration and an explanation of all the possible parameters:

services:    - serviceId: petstore      catalogUiTileId: static      title: Petstore Sample Service      description: This is a sample server Petstore service      instanceBaseUrls:        - http://localhost:8080      homePageRelativeUrl: /home # Normally used for informational purposes for other services to use it as a landing page      statusPageRelativeUrl: /application/info  # Appended to the instanceBaseUrl      healthCheckRelativeUrl: /application/health  # Appended to the instanceBaseUrl      routes:        - gatewayUrl: api/v2          serviceRelativeUrl: /v2      authentication:              scheme: httpBasicPassTicket              applid: ZOWEAPPL      apiInfo:        - apiId: io.swagger.petstore          gatewayUrl: api/v2          swaggerUrl: http://localhost:8080/v2/swagger.json          documentationUrl: https://petstore.swagger.io/          version: 2.0.0          defaultApi: true      customMetadata:          yourqualifier:              key1: value1              key2: value2
catalogUiTiles:    static:        title: Static API services        description: Services which demonstrate how to make an API service discoverable in the APIML ecosystem using YAML definitions
additionalServiceMetadata:    - serviceId: petstore      mode: UPDATE # How to update UPDATE=only missing, FORCE_UPDATE=update all set values      authentication:        scheme: bypass
  • serviceId

    This parameter specifies the service instance identifier that is registered in the API Mediation Layer installation. The service ID is used in the URL for routing to the API service through the Gateway. The service ID uniquely identifies the service in the API Mediation Layer. The system administrator at the customer site defines this parameter.

    Important! Ensure that the service ID is set properly with the following considerations:

    • When two API services use the same service ID, the API Gateway considers the services to be clones (i.e. two instances for the same service). An incoming API request can be routed to either of them.

    • The same service ID should be set only for multiple API service instances for API scalability.

    • The service ID value must contain only lowercase alphanumeric characters.

    • The service ID cannot contain more than 40 characters.

    • The service ID is linked to security resources. Changes to the service ID require an update of security resources.

      Examples:

    • If the customer system administrator sets the service ID to monitoringpr1, the API URL in the API Gateway appears as the following URL:

      `https://gateway:port/monitoringpr1/api/v1/...`
    • If customer system administrator sets the service ID to authenticationprod1, the API URL in the API Gateway appears as the following URL:

      `http://gateway:port/authenticationprod1/api/v1/...`
  • title

    This parameter specifies the human readable name of the API service instance (for example, Monitoring Prod or systemInfo LPAR1). This value is displayed in the API catalog when a specific API service instance is selected. This parameter is externalized and set by the customer system administrator.

    Tip: We recommend that you provide a specific default value of the title. Use a title that describes the service instance so that the end user knows the specific purpose of the service instance.

  • description

    This parameter specifies a short description of the API service.

    Examples:

    • Monitoring Service - Production Instance

    • System Info Service running on LPAR1

      This value is displayed in the API Catalog when a specific API service instance is selected. This parameter is externalized and set by the customer system administrator.

      Tip: Describe the service so that the end user knows the function of the service.

  • instanceBaseUrls

    This parameter specifies a list of base URLs to your service's REST resource. It will be the prefix for the following URLs:

    • homePageRelativeUrl

    • statusPageRelativeUrl

    • healthCheckRelativeUrl

      Examples:

    • - http://host:port/ftpservice for an HTTP service

    • - https://host:port/source-code-mngmnt for an HTTPS service

      You can provide one URL if your service has one instance. If your service provides multiple instances for the high-availability then you can provide URLs to these instances.

      Examples:

    • - https://host1:port1/source-code-mngmnt

    • - https://host2:port2/source-code-mngmnt

  • homePageRelativeUrl

    This parameter specifies the relative path to the homepage of your service. The path should start with /. If your service has no homepage, omit this parameter. The path is relative to the instanceBaseUrls.

    Examples:

    • homePageRelativeUrl: / The service has homepage with URL ${baseUrl}/
    • homePageRelativeUrl: /ui/ The service has homepage with URL ${baseUrl}/ui/
    • homePageRelativeUrl: The service has homepage with URL ${baseUrl}
  • statusPageRelativeUrl

    This parameter specifies the relative path to the status page of your service. Start this path with /. If you service doesn't have a status page, omit this parameter. The path is relative to the instanceBaseUrls.

    Example:

    statusPageRelativeUrl: /application/info

    the result URL will be:

    ${baseUrl}/application/info

  • healthCheckRelativeUrl

    This parameter specifies the relative path to the health check endpoint of your service. Start this URL with /. If your service does not have a health check endpoint, omit this parameter. The path is relative to the instanceBaseUrls.

    Example:

    healthCheckRelativeUrl: /application/health

    This results in the URL:

    ${baseUrl}/application/health

  • routes

    The following parameters specify the routing rules between the Gateway service and your service. Both specify how the API endpoints are mapped to the API Gateway endpoints.

    • routes.gatewayUrl

      The gatewayUrl parameter sets the target endpoint on the Gateway. This is the portion of the final URL that is Gateway specific.

      Example:

      For the petstore example, the full Gateway URL would be:

      https://gatewayUrl:1345/petstore/api/v2/pets/1

      In this case, the URL that will be called on the service is:

      http://localhost:8080/v2/pets/1

    • routes.serviceRelativeUrl

      The serviceRelativeUrl parameter points to the target endpoint on the service. This is the base path on the service called through the Gateway.

  • authentication

    Parameters under this grouping allow a service to accept the Zowe JWT token. The API Gateway translates the token to an authentication method supported by a service.

    • authentication.scheme

      This parameter specifies a service authentication scheme. The following schemes are supported by the API Gateway:

      • bypass

        This value specifies that the token is passed unchanged to the service. This is the default scheme when no authentication parameters are specified.

      • zoweJwt

        This value specifies that a service accepts the Zowe JWT token. No additional processing is done by the API Gateway.

      • httpBasicPassTicket

        This value specifies that a service accepts PassTickets in the Authorization header of the HTTP requests using the basic authentication scheme. It is necessary to provide a service APPLID in the apiml.authentication.applid parameter.

        Tip: For more information, see Enabling PassTicket creation for API Services that accept PassTickets.

      • safIdt

        This value specifies that the application recognizes the SAF IDT scheme and fills the X-SAF-Token header with the token produced by the Saf IDT provider implementation.

        For more information, see SAF IDT provider

      • x509

        This value specifies that a service accepts client certificates forwarded in the HTTP header. The Gateway service extracts information from a valid client certificate. For validation, the certificate needs to be trusted by API Mediation Layer, and needs to contain a Client Authentication (1.3.6.1.5.5.7.3.2) entry in Extended Key Usage. To use this scheme, it is also necessary to specify which headers to include. Specify these parameters in headers.

      • zosmf

        This value specifies that a service accepts z/OSMF LTPA (Lightweight Third-Party Authentication). This scheme should only be used for a z/OSMF service used by the API Gateway Authentication Service, and other z/OSMF services that are using the same LTPA key.

        Tip: For more information about z/OSMF Single Sign-on, see Establishing a single sign-on environment.

    • authentication.headers

      When the x509 scheme is specified, use the headers parameter to select which values to send to a service. Use one of the following values:

      • X-Certificate-Public

        The public part of client certificate base64 encoded

      • X-Certificate-DistinguishedName

        The distinguished name from client certificate

      • X-Certificate-CommonName

        The common name from the client certificate

    • authentication.applid

      This parameter specifies a service APPLID. This parameter is only valid for the httpBasicPassTicket authentication scheme.

  • apiInfo

    This section defines APIs that are provided by the service. Currently, only one API is supported.

    • apiInfo.apiId

      This parameter specifies the API identifier that is registered in the API Mediation Layer installation. The API ID uniquely identifies the API in the API Mediation Layer.The same API can be provided by multiple services. The API ID can be used to locate the same APIs that are provided by different services.
      The creator of the API defines this ID.The API ID needs to be a string of up to 64 characters

      that uses lowercase alphanumeric characters and a dot: ..

      **Tip:** We recommend that you use your organization as the prefix.
      **Examples:**
      - `zowe.file`- `ca.sysview`- `ibm.zosmf`
    • apiInfo.gatewayUrl

      This parameter specifies the base path at the API Gateway where the API is available. Ensure that this path is the same as the gatewayUrl value in the routes sections.

    • apiInfo.swaggerUrl

      (Optional) This parameter specifies the HTTP or HTTPS address where the Swagger JSON document is available.

    • apiInfo.documentationUrl

      (Optional) This parameter specifies a URL to a website where external documentation is provided. This can be used when swaggerUrl is not provided.

    • apiInfo.version

      (Optional) This parameter specifies the actual version of the API in semantic versioning format. This can be used when swaggerUrl is not provided.

    • apiInfo.defaultApi

      (Optional) This parameter specifics that the API is the default one to show in the API Catalog. If this not set to true for any API, or multiple APIs have it set to true, then the default API becomes the API with the highest major version as seen in apiInfo.version.

  • customMetadata

    Custom metadata are described here.

  • catalogUiTileId

    This parameter specifies the unique identifier for the API services group. This is the grouping value used by the API Mediation Layer to group multiple API services together into "tiles". Each unique identifier represents a single API Catalog UI dashboard tile. Specify the value based on the ID of the defined tile.

  • catalogUiTile

    This section contains definitions of tiles. Each tile is defined in a section that has its tile ID as a key. A tile can be used by multiple services.

    catalogUiTiles:    tile1:        title: Tile 1        description: This is the first tile with ID tile1    tile2:        title: Tile 2        description: This is the second tile with ID tile2
    • catalogUiTile.{tileId}.title

      This parameter specifies the title of the API services product family. This value is displayed in the API Catalog UI dashboard as the tile title.

    • catalogUiTile.{tileId}.description

      This parameter specifies the detailed description of the API Catalog UI dashboard tile. This value is displayed in the API Catalog UI dashboard as the tile description.

  • additionalServiceMetadata

    This section contains a list of changes that allows adding or modifying metadata parameters for the corresponding service.

    • additionalServiceMetadata.serviceId

      This parameter specifies the service identifier for which metadata is updated.

    • additionalServiceMetadata.mode

      This parameter specifies how the metadata are updated. The following modes are available:

      UPDATE

      Only missing parameters are added. Already existing parameters are ignored.

      FORCE_UPDATE

      All changes are applied. Existing parameters are overwritten.

    • additionalServiceMetadata.{updatedParameter}

      This parameter specifies any metadata parameters that are updated.

Add and validate the definition in the API Mediation Layer running on your machine#

After you define the service in YAML format, you are ready to add your service definition to the API Mediation Layer ecosystem.

The following procedure describes how to add your service to the API Mediation Layer on your local machine.

Follow these steps:

  1. Copy or move your YAML file to the config/local/api-defs directory in the directory with API Mediation Layer.

  2. Start the API Mediation Layer services.

    Tip: For more information about how to run the API Mediation Layer locally, see Running the API Mediation Layer on Local Machine.

  3. Run your Java application.

    Tip: Wait for the services to be ready. This process may take a few minutes.

  4. Validate successful onboarding

    You successfully defined your Java application if your service is running and you can access the service endpoints. The following example is the service endpoint for the sample application:

    https://localhost:10010/petstore/api/v2/pets/1

Add a definition in the API Mediation Layer in the Zowe runtime#

After you define and validate the service in YAML format, you are ready to add your service definition to the API Mediation Layer running as part of the Zowe runtime installation on z/OS.

Follow these steps:

  1. Locate the Zowe instance directory. The Zowe instance directory is the directory from which Zowe was launched, or else was passed as an argument to the SDSF command used to start Zowe. If you are unsure which instance directory a particular Zowe job is using, open the JESJCL spool file and navigate to the line that contains STARTING EXEC ZWESVSTC,INSTANCE=. This is the fully qualified path to the instance directory.

    Note: We use the ${zoweInstanceDir} symbol in following instructions.

  2. Add the fully qualified zFS path of your YAML file to ZWE_STATIC_DEFINITIONS_DIR in zowe.yaml.

    • To hold your YAML file outside of the instance directory, add ZWE_STATIC_DEFINITIONS_DIR variable to the zowe.environments section of zowe.yaml. Append the fully qualified zFS path of the YAML file to the ZWE_STATIC_DEFINITIONS_DIR variable. You may specify multiple zFS paths, separating each path by a semicolon.

    • To place your YAML file within the instance directory, copy your YAML file to the ${zoweInstanceDir}/workspace/api-mediation/api-defs directory.

    Notes:

    • The ${zoweInstanceDir}/workspace/api-mediation/api-defs directory is created the first time that Zowe starts. If you have not yet started Zowe, this directory might be missing.
    • The user ID ZWESVUSR that runs the Zowe started task must have permission to read the YAML file.
  3. Ensure that your application that provides the endpoints described in the YAML file is running.

  4. Restart Zowe runtime or follow steps in section (Optional) Reload the services definition after the update when the API Mediation Layer is already started which allows you to add your static API service to an already running Zowe.

  5. Validate successful onboarding

You successfully defined your Java application if your service is running and you can access its endpoints. The endpoint displayed for the sample application is:

https://l${zoweHostname}:${gatewayHttpsPort}/petstore/api/v2/pets/1

(Optional) Check the log of the API Mediation Layer#

The API Mediation Layer log can contain messages based on the API ML configuration. The API ML prints the following messages to its log when the API definitions are processed:

Scanning directory with static services definition: config/local/api-defsStatic API definition file: /Users/user/workspace/api-layer/config/local/api-defs/petstore.ymlAdding static instance STATIC-localhost:petstore:8080 for service ID petstore mapped to URL http://localhost:8080

Note: If these messages are not displayed in the log, ensure that the API ML debug mode is active.

(Optional) Reload the services definition after the update when the API Mediation Layer is already started#

The following procedure enables you to refresh the API definitions after you change the definitions when the API Mediation Layer is already running.

Follow these steps:

  1. Use a REST API client to issue a POST request to the Discovery Service (port 10011):

    http://localhost:10011/discovery/api/v1/staticApi

    The Discovery Service requires authentication by a client certificate. If the API Mediation Layer is running on your local machine, the certificate is stored at keystore/localhost/localhost.pem.

    This example uses the HTTPie command-line HTTP client and is run with Python 3 installed:

    httpie --cert=keystore/localhost/localhost.pem --verify=keystore/local_ca/localca.cer -j POST     https://localhost:10011/discovery/api/v1/staticApi

    Alternatively, it is possible to use curl to issue the POST call if it is installed on your system:

    curl -X POST --cert keystore/localhost/localhost.pem --cacert keystore/localhost/localhost.keystore.cer https://localhost:10011/discovery/api/v1/staticApi
  2. Check if your updated definition is effective.

    Note: It can take up to 30 seconds for the API Gateway to pick up the new routing.